Products
|
L1800FD
L1800FD DSP POWER AMPLIFIER 2X950W
SPECIFICATIONS:
Load Impedance 2Ω 2.6Ω 4Ω 8Ω Maximum Output Power, SIngle Channel 2Ω: 1600W; 2.6Ω: 1300W; 4Ω: 950W; 8Ω: 480W Maximum Output Power, Dual Channel 2Ω: 1400W; 2.6Ω: 1200W; 4Ω: 850W; 8Ω: 450W Maximum Output Power, Bridged 4Ω: 2800W; 8Ω: 1700W Maximum RMS Voltage Swing, THD = 1%, 1kHz 65.1V Voltage Gain ref.1kHz 32.0dB IMD-SMPTE, 60 Hz, 7 kHz <0.1% DIM 30 <0.05% (3.15 kHz, 15 kHz) Maximum Input Level +21dBu Crosstalk < -80dB (ref. 1 kHz, at 100 W/4 Ω) Frequency Response 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced 20kΩ Signal-to-Noise Ratio (A-weighted) >105dB Output Noise , A-weighted <-68dBu Output Stage Topology Class AB Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption 700W (⅛ Maximum Output Power @4Ω) Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling Front-to-rear, 3-stage-fans Safety Class I Available Color Black Height 88mm (3.46") Width 483mm (19.02") Depth 462.4mm (18.2") Weight Net 15.2kg (33.51 lbs) Signal Processing FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH Operating Temperature Range +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion <0.05% (600 W/4 Ω MBW = 80 kHz, 1 kHz)
|
|
|
|
|